Filter
Top Products
DSM250 User’s Manual
Page 172 Revision 1.4.16a
Figure 193 – European Standard Sender Calibration
6.23.5 Tank Number
Next, the tank number must be configured. A tank number can have a value between 0 and 15. Each
tank of a particular type must have a tank number that is different from all other tanks of the same
type. For instance, only one TLA100 on a fuel tank may have tank number equal to “0”. A screenshot
of tank number configuration is shown in Figure 194 below. In order to configure the tank number,
use the Scroll Up ( ) or Scroll Down ( ) keys to move the highlighted cursor to “Tank Number:”,
then press the Enter key ( ) to move the cursor over to the tank number value. Use the Scroll Up (
) or Scroll Down ( ) keys to select the desired tank number. Finally, press the Enter key ( )
to confirm your selection and store the new tank number within the TLA100.
Figure 194 – Configuring the Tank Number
6.23.6 Tank Type
The TLA100 can be used in tanks containing any of a number of different types of fluids. So that
network-connected monitoring devices can determine easily what sort of fluid is in the monitored tank,
the TLA100 must be programmed to indicate the fluid type it is monitoring. Figure 195 below shows a
screen shot of the tank type being configured. First, use the Scroll Up (
) or Scroll Down ( )