Filter
Top Products
Revision 1.4.16a Page 101
®®
6.12.4.1.12 Volume Instance
Program this parameter to match the desired instance number of the volume reading for this channel.
You can program this parameter to any value between 0 and 252. The default value for this
parameter is 0.
6.12.4.1.13 Volume Label
Program this parameter with a text string which identifies the particular volume parameter being
monitored by this channel. Maretron display products will display this label text when you are
selecting data to display.
6.12.4.2 Channel #0 Configuration Menu (Two Independent Sensors Mode)
This section describes the Channel #0 configuration parameters when the FFM100’s operating mode
has been set to “Two Independent Sensors”. The Channel #0 (Two Independent Sensors Mode)
menu is too large to fit on a single screen, so it is shown in two separate screenshots below.
Figure 93 – FFM100 Channel #0 First Configuration Screen (Two Independent Sensors Mode)
Figure 94 – FFM100 Channel #0 Second Configuration Screen (Two Independent Sensors
Mode)