Filter
Top Products
Revision 1.4.16a Page 181
®®
Once the tank is completely full, instead of pressing the Accept key to store the current calibration
point, press the Complete key. This will complete the calibration process and will also adjust the tank
capacity to the currently indicated level. Figure 208 below shows the calibration screen at the last
point with the full tank level (and thus the tank capacity) set to 101 gallons.
Figure 208 – Full Level Calibration
After you press accept, a confirmation screen will appear showing completion of the calibration
process and the new tank capacity value. A screenshot of this calibration screen is shown below in
Figure 209.
Figure 209 – Custom Tank Level Calibration Confirmation Screen
6.24.4.2 Rectangular Tank
If you have a rectangular tank, and you know the capacity of the tank, you can easily calibrate the
sender by using the “Rectangular Tank” menu item. Figure 210 below shows this option highlighted.
Use the Scroll Up ( ) or Scroll Down ( ) keys to move the highlight over this menu item, and
then press the Enter key ( ).