Filter
Top Products
DSM250 User’s Manual
Page 186 Revision 1.4.16a
Figure 215 – TMP100 Channel Configuration Screen
6.27.2.1 Instance
The Data Instance of the Temperature (as sent in PGNs 130311, 130312, and 130823) is set in this
field. Use the Increase and Decrease buttons to select the correct instance number, and the press
the Enter button to store it.
6.27.2.2 Source
In the NMEA2000
®
PGNs, each temperature is associated with a source type. Possible values are:
Bait Well Temperature
Engine Room Temperature
Exhaust Gas Temperature
Freezer Temperature
Heating System Temperature
Inside Temperature
Live Well Temperature
Main Cabin Temperature
Outside Temperature
Refrigeration Temperature
Sea Temperature
User Defined Temperature #129...#144 – Use this when none of the above options are suitable.
Use the Scroll Up and Scroll Down buttons to select the correct source, and the press the Enter
button to store it.
6.27.2.3 Label
A label may be assigned to each channel of the TMP100 as an aid to identifying the temperature that
is being displayed. Typically this label will describe the function or location of the temperature sensor.
6.27.3 Device Label
A label may be assigned to the TMP100 as an aid to identifying the device over the network. Typically
this label will describe the location of the TMP100.