Filter
Top Products
Revision 1.4.16a Page 47
®®
6.1 Airmar Depth/Speed/Temperature Transducers
The DSM250 supports configuration and calibration of the following Airmar
Depth/Speed/Temperature transducers that have NMEA 2000
®
interfaces:
• DST800
• DT800
• P39
• P79
• B122
• ST850
• ST800
• HT200
The following calibration functions are supported (not all functions apply to every model of
transducer):
• Reset trip log
• Set depth Offset
• Perform Speed Calibration
• Program Temperature Offset
Figure 33 – Airmar Depth/Speed/Temperature Transducer Configuration Screen
6.1.1 Advanced Configuration
Advanced Configuration changes some complex parameters within the device, and should only be
performed by an advanced user. Typically advanced configuration is only done at installation and
should not need to be done while at sea.