Filter
Top Products
Revision 1.4.16a Page 189
®®
are satisfied with the state of the “Display” setting, press the Enter key ( ) to accept the
setting. The USB100 will retain information on devices that have been removed from the bus
or powered down (“Offline”) so that when they are placed back on the bus, they will assume
their prior “Display” setting.
6.29 Maretron VDR100 Configuration
The DSM250 is capable of performing configuration of the VDR100 Vessel Data Recorder. This
describes the configuration of the Maretron VDR100 firmware version 1.0.1.0. Figure 219 below
shows a screenshot of the VDR100 configuration menu.
Figure 219 – VDR100 Configuration Screen
6.29.1 Advanced Configuration
Advanced Configuration changes some complex parameters within the device, and should only be
performed by an advanced user. Typically advanced configuration is only done at installation and
should not need to be done while at sea.
Figure 220 – VDR100 Advanced Configuration Screen
6.29.1.1 Device Instance