Filter
Top Products
DSM250 User’s Manual
Page 108 Revision 1.4.16a
Figure 99 – FPM100 Advanced Configuration Screen
6.13.1.1 Device Instance
This entry allows you to program the NMEA 2000 device instance for the unit. You usually will not
need to modify the default value of “0” unless you have multiple units on the network.
6.13.1.2 Installation Description
This entry allows you to modify the NMEA 2000 installation description text strings. You can enter
any information you like here, such as the date the unit was installed, or the location in which it was
installed, for later reference. Tools such as Maretron N2KAnalyzer allow you to view these values
later.
6.13.1.3 NMEA2000 PGN Enable/Disable…
The FPM100 Fluid Pressure Module transmits a number of the NMEA2000
®
PGNs which can be
turned on or turned off by the DSM250 display. Pressing the Enter key with “NMEA2000 PGN
Enable/Disable…” menu item selected causes the DSM250 to display the following screen (Figure
100).
Figure 100 – FPM100 NMEA 2000
®
PGN Enable/Disable Screen