2
Product checking and parts identification
1.1 Product checking and parts identification
Unpack the inverter and check the capacity plate on the front cover and the rating plate on the inverter side face to ensure that
the product agrees with your order and the inverter is intact.
Inverter type
• Accessory
· Fan cover fixing screws (M3
×
35mm)
These screws are necessary for compliance with the European Directive
(
Refer to Installation Guideline
)
Type Number
FR-D720-070 to 165
FR-D740-036 to 080
FR-D720S-070, 100
1
FR-D720-120, 160
FR-D740-120, 160
2
Capacity plate
Inverter type
Serial number
Rating plate
FR-D740-036-NA
Inverter type
Input rating
Output rating
Serial number
036 NA
Control circuit terminal
block
(Refer to page 20)
Control logic switchover
jumper connector
(Refer to page 22)
Combed shaped
wiring cover
(Refer to page 7)
Main circuit
terminal block
(Refer to page 15)
Front cover
(Refer to page 5)
PU connector
(Refer to page 21)
FR
--
Symbol Voltage class
D740 036
Displays the rated
current
- NA
D720
Three-phase 200V class
D740
Three-phase 400V class
D720S
Single-phase 200V class
Voltage/current input switch
(Refer to page 20)
Cooling fan
(Refer to page 267)
Operation panel
(Refer to page 52)