Filter
Top Products
C Commands Summary
106 MiLLennium GPSCard SW Version 4.503/4.52 Command Descriptions Manual Rev 2
LOCKOUT
This command will prevent the GPSCard from using a satellite by de-weighting its range in the solution
computations. Note that the LOCKOUT command does not prevent the GPSCard from tracking an undesirable
satellite. This command must be repeated for each satellite to be locked out.
See also the UNLOCKOUT and UNLOCKOUTALL commands.
Syntax:
Example:
lockout 8
LOCKOUT prn
Syntax Range Value Description Default
LOCKOUT - Command unlockoutall
prn 1 - 32 A single satellite PRN integer number to be locked out