Filter
Top Products
Chapter 3: Operation 3-17
Waypoint Data Display
In plotter mode, waypoint data can be viewed in two ways; either using
the context-sensitive cursor to select the waypoint and display the pop-up
Waypoint Data Box, or by viewing waypoint details from the Waypoint
List.
➤ To display the waypoint details from the Waypoint List:
1. Select the waypoint from the Waypoint List as described in Selecting
a Waypoint on page 3-16.
The details for the selected waypoint are displayed. Temperature,
depth, date and time are included (if available) for waypoints placed
at the vessel’s position.
2. To remove the Waypoint List and return to the default soft key dis-
play, press CLEAR twice.
➤ To display the Waypoint Data Box:
1. Move the cursor over the waypoint.
• The Waypoint Data Box is displayed which indicates waypoint
number/name, bearing and range (or lat/lon if selected in the sys-
tem set up menu, see System Set Up Parameters on page 4-3).
• Whilst the cursor is over the waypoint, the waypoint soft keys are
displayed, see Figure 3-23.
➤ To remove the Waypoint Data Box and soft keys either:
1. Move the cursor away from the waypoint, or...
2. Press CLEAR.
Editing Waypoint Details
You can change the name, symbol and position of any waypoint (except
the target waypoint).
➤ To edit a waypoint:
1. Select the waypoint, using the cursor or the Waypoint List, as
described in Selecting a Waypoint on page 3-16. The waypoint soft
keys are displayed.
2. Press the EDIT WAYPOINT soft key. The Edit Waypoint soft keys are
displayed:
Figure 3-24: Edit Waypoint Soft Keys
Note: The ERASE WPT soft key is only available via the Waypoint List.
NAME POSITION
SYMBOL
ERASE WPT
D4908-1