Filter
Top Products
3-18 Raynav 300 GPS Plotter
3. To edit the symbol, press the SYMBOL soft key.
Use the soft keys, shown in Figure 3-25, to highlight the required
symbol, then press ENTER to confirm the selection.
Press CLEAR to return to the default soft keys.
Figure 3-25: Waypoint Symbol Selection
4. To edit the waypoint name, press the NAME soft key.
The NAME WAYPOINT window is displayed.
5. Use the trackpad to enter or edit the name:
• Use the trackpad left/right to move the cursor to the character to
be changed.
• Use the trackpad top/bottom to scroll through the characters.
6. When name editing is complete, press ENTER to save the name and
remove the window, or CLEAR to cancel the operation. The waypoint
name replaces the waypoint number.
7. Press CLEAR to return to the default soft keys.
8. To edit the waypoint position, press the EDIT WAYPOINT soft key, fol-
lowed by POSITION.
The Waypoint Position pop-up box is displayed.
9. Use the soft keys to select LAT, LON, BRG or RNG.
Note: If no fix has been acquired, the SET BRG and SET RNG soft keys are
unavailable and grayed out.
10. Use the trackpad to edit the value:
• Use the trackpad left/right to move the cursor to the character to
be changed.
• Use the trackpad top/bottom to scroll through the characters.
• Adjust each parameter until the waypoint position is correct.
11. When position editing is complete, press ENTER to save the position
or CLEAR to cancel the operation.
The Waypoint Position window is removed from the screen and the
default soft keys are displayed.
SELECT SYMBOL
D4909_1