Filter
Top Products
4-4 Raynav 300 GPS Plotter
Bearing Mode
This is the mode (magnetic or true) of all the bearing and heading data
displayed as indicated in the status bar.
Cursor Reference
The mode of the bearing data displayed for the cursor readout. The
bearing information can be displayed in either of two forms:
• Relative: The bearing relative to your vessel’s heading.
• Mag/True: The actual bearing in either degrees magnetic or degrees
true. This option is only available if you have heading data from a
compass.
If you choose this mode, the selection you made for the previous
parameter (Bearing Mode), °M or °T, is displayed in the cursor
NMEA-OUT
SET UP
OFF or ON
(for each sentence)
ON
(all)
CURSOR ECHO RADAR CURSOR IN - OFF/ON
CHART CURSOR IN - OFF/ON
SEATALK CURSOR OUT - OFF/ON
OFF
OFF
OFF
DATE FORMAT DD/MM/YY
MM/DD/YY
MM/DD/YY
TIME FORMAT 12 HOUR
24 HOUR
12 HOUR
TIME OFFSET UTC, or local offset value:
Plus or minus up to 13 hours, in
whole hours
UTC
GPS SOURCE MASTER or REPEATER MASTER
GPS SOG/COG
FILTER
HIGH, MEDIUM or LOW MEDIUM
NMEA INPUT NMEA or RTCM NMEA
LANGUAGE English (UK),
English (US),
Danish, French, German,
Dutch, Icelandic, Italian,
Norwegian, Portuguese,
Spanish, Swedish, Finnish
English (US)
SIMULATOR OFF or ON OFF
Table 4-1: System Set Up Parameters (Continued)
Menu Options
Factory
Default
New
Default