Microplate Luminometer System Description
7
2.2.1 Operating Components on the Front Panel
Four LED’s inform you at one glance about the current status of
the luminometer.
The LED’s from right to left:
1. Green Microplate Luminometer is turned on and
ready for operation.
2. Red Measurement is running.
Do not open instrument door!
3. + 4. Yellow Data transfer between PC and luminometer
Instrument door
The instrument door for loading microplates is on the left in-
strument side. It is opened and closed by hand. When closing
the door, make sure to push it into the spring lock. An audible
click indicates that the instrument door is closed light-tight. If it is
not closed correctly, a warning will appear on the display.
For correct measurements, the instrument door and the
service door must be properly closed so that no outside light
can enter the instrument.
Microplate Injector head and Injector tubings
loading area measurement head
Velcro fastening
Figure 2-3:
MONOLIGHT 3096:
View with instrument
door and service
door open
Injector 2
Injector 1
