A SERVICE OF

logo

Open as PDF
next previous
Microplate Luminometer Installation and Commissioning
35
❏ In the field [Protocol type], select the protocol type [Raw Data
PC] and click <Create>. The [Raw Data PC Parameters]
dialog box appears with several tabs for input of the meas-
urement parameters.
❏ First, the [Timing] tab appears.
❏ When only one injector is used, select either, [Use
injection 1], or [Use injection 2]; if your system includes the
Injector Unit.
❏ Enter required measuring time per well. The default value is 1
second.
❏ Select the [General] tab and check the microplate type you are
using (96 wells).
❏ Select [Take background at start of plate measurement] if
you want to run a background measurement prior to the sam-
ple measurement.
Figure 3-13:
[Timing] tab in the
[Raw Data PC
Parameters]
dialog box