Microplate Luminometer Structure of the Software
43
protocol must not be identical with the name of the protocol type,
but should refer to the measurement method. You can enter a
comment for each measurement protocol; it appears in the field
next to the measurement protocol list, when the respective
protocol has been selected (see Figure 4-2).
[Runable protocols]
The available measurement protocols are listed in alphabetical
order. They are based on a selected protocol type and include
the parameters defined by the user. The following buttons are
available to edit measurement protocols:
<Run...>Opens the measurement menus to start a meas-
urement with the selected protocol.
<Edit...> Shows the selected measurement protocol and
lets you change it.
<Delete> Deletes the selected protocol.
4.2.2 [Instrument] Tab
On this page, enter and view the instrument parameters and ini-
tialize the instrument. Only the buttons <Instrument options...>,
<Check instrument> and <Take Background> are important for
the user.
<Instrument options...> takes you to the [Instrument Options]
dialog box to define the instrument communication port (see
section 3.9 Instrument Configuration).
Further Protocol Manager Options
<Retrieve Data> Load and display stored measurement data.
<Options> Select subdirectory to which the measured
data are to be saved.
<Exit> Exit program.
