Microplate Luminometer Safety Instructions
2
6. The instruments are live and improper handling may
cause damage.
7. Before opening the instruments, disconnect the power sup-
ply.
8. Switch off the instruments before pulling the power cord.
9. Spare fuses must match the values specified by the instru-
ment manufacturer. The fuses must not be short-circuited or
tampered with.
10. All instruments supplied and all additional devices must be
grounded. Use three-pole grounded plugs.
11. If you can see that the units have become unsafe to use,
switch them off and disconnect them from the power supply.
12. If liquid gets inside the instruments, pull the power cord.
Clean the unit or have it cleaned by an authorized service
center.
The tests and maintenance work recommended by the manu-
facturer should be performed to make sure that the operator re-
main safe and that the instrument continues to function correctly.
Any service and maintenance work not described in the operat-
ing manual must be performed by authorized service engineers.
