A SERVICE OF

logo

Microplate Luminometer Maintenance
92
Insert new fuse(s).
Caution: Observe the required fuse types, current and fuse
ratings. (see label on instrument rear panel). Otherwise, the
operating safety cannot be guaranteed and the instrument
will lose its UL (Underwriters Laboratories) approval.
Install fuse holder correctly, so that the pin fits into the hole
corresponding to the operating voltage.
Function check:
Attach power cable to the wall outlet.
Turn instrument on.
Check if green LED is on.
If the green LED is not on, please contact our Service Depart-
ment.