Microplate Luminometer Installation and Commissioning
39
Next measurement
❏ To run the next measurement with the same measurement
protocol, click (New measurement). The next measure-
ment can be started immediately when the data of the
preceding measurement have already been saved. Otherwise
you will be prompted to save this data. If you have stored the
data or if you have replied <No>, the screen is cleared for the
next measurement and the icon buttons are enabled again.
❏ To run the next measurement with another measurement
protocol, select [Exit] on the [File] menu. If the data of the
preceding measurement have not yet been stored you will be
prompted to save this data. After you have stored the data or if
you have replied <No>, the program returns to the Protocol
Manager and you can select a new measurement protocol.
