Microplate Luminometer Maintenance
93
8.3 Changing the Operating Voltage for
MONOLIGHT 3096
You need:
1 small flathead screwdriver
1 flat-nose pliers
2 fuses for the respective operating voltage
For operating voltage 230 V: Fuse: 160 mA slow-blow
For operating voltage 115/120 V: Fuse: 315 mA slow-blow
Use only UL-approved fuses!
The instrument is designed for operation at 230 V (Euro voltage)
or 115 V (US Voltage). The voltage setting must be changed only
when operating the instrument in a country with a different
operating voltage.
Power cord connector
0
100V
120V
230V
240V
I
Power switch Recess for screwdriver Fuse holder
❏ Turn main switch to off ("0").
❏ Unplug power cord from wall outlet.
❏ Insert a screwdriver or a similar tool into the recess on the
right side of the fuse holder, push slightly and take the fuse
holder out.
❏ Replace both fuses and carefully put the fuse holder aside.
Figure 8-2:
Power supply unit
on the instrument
rear panel
