SRS-1050 Installation ( Appendix B
Page B-16
Note: This step is not necessary
if CONFERENCE is assigned
to Button 18, using Feature
Activator 18 or 60.
1. Assign CONFERENCE as you
would any feature activator.
2. In the KEY ATTR MODE, press
5, CONFERENCE, then press
ENTER:
CONF APPEARANCE
SELECT ASSIGN KEY
3. Press selected CONFERENCE
button. This screen appears:
CONFKEY = (XX) FA =
(XX)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
4. Press ENTER. The selected
button's LED turns green.
CONFKEY = 18 FA = 18
or 61
COMPLETED
Selection 6: Transfer Key
Note: This step is not necessary
if TRANSFER is assigned to
Button 20, using Feature
Activator 20 or 61.
1. To manually assign the Transfer
key for your SRS-1050, press 6,
ENTER to view the following
display:
TRANSFER REGISTRATION
SELECT ASSIGN KEY
