Chapter 2 ( SRS-1050 Voice Features
Page 2-5
or
b. Retain the call by pressing
the green-flashing Call
Appearance button to
answer the incoming call.
(The first call is
automatically put on hold.)
2. Converse with the calling party.
3. When your conversation ends,
you have the following choices:
• Hang up by replacing the
handset in its cradle. Note
the displayed call duration;
it vanishes after about three
seconds.
• If you put your original call
on hold, pick up the call by
pressing its red-flashing Call
Appearance button.
Placing Handsfree Calls
A handsfree call uses the
integrated microphone and
speaker instead of the handset.
If you are not talking on
another call
1. Press the SPEAKER button. Its
LED will light red (if not, press
an idle Call Appearance) and
you will hear a dial tone. (If this
connects you with a ringing call,
follow the procedure "If you are
already talking on another call".)
