Chapter 3 ( SRS-1050 Local Features
Page 3-7
Setting Calendar and Clock
Values
To set the calendar/clock, follow
these steps:
1. Press REG (softkey 4), 2, ENTER
(softkey 1). This screen
appears:
ENTER CALENDAR/CLOCK
8:06PM SUN APR 30
2. Press ENTER. The first input
screen appears:
INPUT HOUR ->
8:06PM '93 APR 30
3. Enter the present hour using the
numeric keypad and then press
ENTER.
The screen changes to reflect
your entry and to prompt for the
minute. In this example, assume
you entered 12.
INPUT MINUTE ->
12:06PM '93 APR 30
Note: If you enter #, *, or too
large a value, such as 33, for
the hour, it is ignored, and
you must supply a valid entry.
4. Enter the present minute using
the numeric keypad and then
press ENTER (softkey 1).
The screen changes to reflect
your entry and to prompt for AM
or PM. In this example, assume
you entered 55.
INPUT 0:AM 1:PM ->
12:55PM '93 APR 30
5. Press keypad 0 for AM or 1 for
PM and then press ENTER.
The screen changes to reflect
your entry and to prompt for the
year. In this example, assume you
entered 1 for PM.
INPUT YEAR ->
12:55PM '93 APR 30
6. To accept the year displayed,
'93, press ENTER.
or
To change the year, press two
numbers on the numeric keypad
for the year you want and then
press ENTER.
The screen changes to reflect
your entry and to prompt for the
month. In this example, assume
you accepted the displayed year.
INPUT MONTH ->
12:55PM '93 APR 30
7. Enter the present month (1 to 12)
using the numeric keypad and
then press ENTER.
