SRS-1050 Local Features ( Chapter 3
Page 3-10
Note: If the following screen
appears, press ENTER to go to
the selection screen.
UNA SERVICE MODE
SUPPORTED (SELECT)
UNA on All Call Appearances
To support UNA on all Call
Appearances, follow these steps:
1. Press 1, ENTER, and this screen
appears:
SUPPORTED (ALL)
COMPLETED
After about 6 seconds, or if you
press asterisk (*), the display
returns to the second Service
Mode screen:
4: UNA 5: H-FREE
6: HAND/HEAD SELECT ITEM (1-13)
2. You can now select a different
menu function, or press REG
(softkey 4) to return to the
normal display:
. . . . . . . . . . . . . . . . . . . . . . . . . . .
12:55PM TUE MAY 1
UNA on Selected Call
Appearances
To support UNA on selected Call
Appearances, follow these steps:
1. Press 2, ENTER, and this screen
appears:
SUPPORTED (SELECT)
SELECT ASSIGN KEY
If ALL (default) was previously
set, all feature buttons light green.
Only Call Appearances with lit
LEDs will log unanswered calls.
Press the buttons to turn the
LEDs on or off to select the Call
Appearances for which you want
to log unanswered calls.
2. Press ENTER when done, and
this screen appears:
SUPPORTED (SELECT)
COMPLETED
After about 6 seconds, or if you
press asterisk (*), the display
returns to the second Service
Mode screen:
4: UNA 5: H-FREE
6: HAND/HEAD SELECT ITEM (1-13)
3. You can now select a different
menu function, or press REG
(softkey 4) to return to the
normal display.
Disabling the UNA Feature
