SRS-1050 Voice Features ( Chapter 2
Page 2-16
1. Press TRANSFER while on an
active call.
The LED of the Call Appearance
in use flashes red; the called or
calling party is automatically
placed on hold.
An idle Call Appearance is
selected. Its LED lights steady
red and a dial tone sounds.
If that directory number has no
idle Call Appearance, you must
select a Call Appearance of
another directory number.
2. Dial the third party.
3. Once connected, announce the
transfer to the person who
answers and converse privately.
4. Press TRANSFER again, and
hang up.
The third party, just called, is
connected to the party held for
transfer. You are dropped from
the call, and the other two
parties remain connected.
Note: A "blind" transfer is one
in which you do not talk to the
person you are transferring
the call to. To perform a blind
transfer, wait for the person's
phone to ring, press the
TRANSFER key, and hang up.
Questions, Details, or
Alternatives
If no one answers the destination
number, hang up. Press the
SPEAKER button, the Switch
Hook, or, with a Lucent switch,
press DROP. Then press the Call
Appearance holding the original
call. This cancels the attempted
transfer and returns you to the
call.
TRANSFER ( DMS-100
Transfers a call to another
phone and announces the
transfer privately
Transfer is a network-based
feature that you must subscribe
to from your telephone company.
This description assumes that
you have assigned the Transfer
feature to one of your SRS-1050
function buttons.
Note: In some installations,
transferring calls is
accomplished without a
TRANSFER button. If your
set lacks a TRANSFER
button, ask your System
Administrator how to transfer
a call.
To transfer a call, follow these
steps:
1. While still on the call, press
TRANSFER.
