Appendix B ( SRS-1050 Installation
Page B-17
2. Press the Multi-assign key #32
(labeled TRANSFER), and the
following display is shown.
TRANSFER REGISTRATION
TRANS KEY = (20) FA=20 or 61
3. Press ENTER.
TRANS KEY = (20) FA=20 or 61
COMPLETED
Note: If the user selects a key
that cannot be used for
Transfer, the following display
is shown:
SELECT ASSIGN KEY
INVALID SELECTION
Note: The SRS-1050 supports
certain new capabilities of
National ISDN 97/98. If you
wish to assign the following
features, the necessary steps
are shown below. The SRS-
1050 will operate using default
values, if you do not make
assignments.
Selection 7: Originating DN
The SRS-1050 supports new ISDN
features that allow you to
designate lines for originating or
receiving calls. This feature
works with a complementary
switch feature that you can order
from your telephone company. It
is called Call Appearance
Reservation.
