Appendix B ( SRS-1050 Installation
Page B-19
Selection 8: Call Appearance
Reservation
If you have subscribed to Call
Appearance reservation on your
ISDN line, it is necessary to
assign a reservation status to
each CA that is subscribed.
1. To manually assign the Call
Appearance Reservation key for
your SRS-1050, press 7, ENTER
to view the following display:
CA RESV MODE
SELECT ASSIGN KEY
2. Press the selected Multi-assign
key.
CA RESV MODE
CA RESV = ORG (1)
3. Press ENTER. The following
display is shown. You have the
option to change the CA
Reservation mode.
TRM = Terminating Only
ORG = Originating Only
ORGIP = Originating and
Priority Incoming Only
OFF = non reserved
1:TRM 2:ORG
3:ORGIP (SELECT 1-4)
Press NEXT to see the following
display.
4:OFF
(SELECT 1-4)
4. Press the number for the desired
setting, then ENTER.
CA RESV = TRM (1)
COMPLETED
Note: If an invalid key is
selected for the CA
Reservation key, the following
display is shown.
CA RESERVATION MODE
INVALID SELECTION (XX)
Note: The SRS-1050 supports
certain new capabilities of
National ISDN 97/98. If you
wish to assign the following
features, the necessary steps
are shown below. The SRS-
1050 will operate using default
values, if you do not make
assignments.
Selection 9: Designated Call
Appearance
In Selection 5 and Selection 6,
you assigned CONFERENCE and
TRANSFER. The SRS-1050
automatically selects the call
button you want to use for the
third connection of a conference
or transfer. This button is called
the Designated Call Appearance
(DCA).
