Filter
Top Products
NOTE: Hardware performance is supported only on Dell PowerEdge 10G and later systems. The Power Supplies
option is not available on Dell PowerEdge 1900. Power management is supported on limited Dell PowerEdge 10G
and later systems. Power Supply Monitoring and Power Monitoring features are available only for systems that
have two or more redundant, hot-swappable power supplies installed. These features are unavailable for
permanently installed, non-redundant power supplies that lack power management circuitry.
Main System Chassis/Main System Properties
The system/server module may contain one main system chassis or several chassis. The main system chassis/main
system contains the essential components of a system. The Main System Chassis/Main System object action window
includes the following:
Properties
Subtabs: Health | Information | System Components (FRU) | Front Panel
Under the Properties tab, you can:
• View the health or status of hardware components and sensors. Each listed component has a System/Server
Module Component Status Indicators icon next to its name. indicates that a component is healthy (normal).
indicates that a component has a warning (noncritical) condition and requires prompt attention. indicates that a
component has a failure (critical) condition and requires immediate attention. indicates that a component's
health status is unknown. The available monitored components include:
• Batteries
• Fans
• Hardware Log
• Intrusion
• Network
• Power Management
• Power Supplies
• Processors
• Temperatures
• Voltages
NOTE: Batteries are supported only on Dell PowerEdge 9G and Dell PowerEdge 10G systems. The Power supplies
is not available on Dell PowerEdge 1900. Power management is supported on limited Dell PowerEdge 10G systems.
Power Supply Monitoring and Power Monitoring features are available only for systems that have two or more
redundant, hot-swappable power supplies installed. These features are unavailable for permanently installed,
non-redundant power supplies that lack power management circuitry.
NOTE: If the QLogic QLE2460 4Gb Single-Port Fibre Channel HBA, QLogic QLE2462 4Gb Dual-Port Fibre Channel
HBA, Qlogic QLE2562 Dual Port FC8 Adapter, or Qlogic QLE2560 Single Port FC8 Adapter cards are installed on 12G
systems, the
System Components (FRU) screen is not displayed.
• View information about the main system chassis attributes such as the Host Name, iDRAC version, Lifecycle
Controller version, Chassis Model, Chassis Lock, Chassis Service Tag, Express Service Code, and Chassis Asset Tag.
The Express Service Code (ESC) attribute is a 11-digit numeric-only conversion of the Dell system Service Tag. When
calling Dell Technical Support, you can key in the ESC for auto call routing.
• View detailed information about the field-replaceable units (FRUs) installed in your system (under the System
Components (FRU) sub tab).
• Enable or disable the managed system's front panel buttons, namely Power button and Non-Masking Interrupt (NMI)
button (if present on the system). Also, select the managed system’s LCD Security Access level. The managed
45