Filter
Top Products
2. DIFFERENTIAL BEACON RECEIVER INPUT: The connector provides an input port for a
differential GPS signal. When using DGPS there will be an indicator on your display. If the
indicator is a hollow box the NS 10 is receiving information from the receiver. If the box is
filled in then good information is being received. When DGPS is displayed the NS 10 is
operating in the differential mode and latitude/longitude values should be within DGPS
tolerances.
3. NMEA OUTPUT: This connector, with the supplied cable, allows the NS 10 to interface with
an autopilot or other electronics which require navigation information. (Refer to section 1X,
NS 10 Interface Option).
4. GPS RECEIVER: The receiver connects here with the supplied cable.
5. Reserved for future use.
IMPORTANT: Do not plug or unplug any connector while the NS 10 control head is turned on.