Filter
Top Products
Simulator and Map Preview
This section explains the use of the unit in simulator mode and map preview. The Simulator and
Map Preview menu is only available when the NS 10 is not navigating. The main difference
between the simulator and map preview is that the simulator shows movement much like a boat,
while the map preview does not show movement. Both allow you to step through all of the
features and functions of the NS 10 without having an operating receiver attached. This allows
you to experiment with the many functions and to permanently store waypoints and routes prior to
travel.
To use the NS 10 without a receiver simply connect the AC adapter to the power (1) connector on
the rear of the NS 10, and plug the transformer into a wall outlet.
Note: The AC adapter is not included with all international models. The power adapter is intended
to power the NS 10 for use with the simulator or for input of navigation points etc. It does not
supply sufficient current to power both the NS 10 and the receiver and is not intended for use in
normal operation.
Press SELECT to retrieve the MAIN MENU.
Use the up/down arrows to highlight SIMULATOR/MAPS
Press ENTER when the setting is correct. The SIMULATOR/MAPS menu will be displayed.
Use the up/down arrows to highlight SET ORIGIN.