Filter
Top Products
Use the up/down arrows to choose YES or NO.
Press ENTER when the setting is correct.
Press SELECT to return to ALL CLEAR menu, pressing SELECT again will exit to the MAIN
MENU, pressing SELECT a third time will exit the Select System and return to the map. Or you
may press MAP, at any time while in the Select System, to return directly to the map display.
Note: When you are finished clearing your NS 10, it will be necessary to use the USER SET-UP
menu to customize the NS 10 for your application. (Refer to section III. "System Options'
Note: Depressing the CLEAR key for three seconds will clear all temporary waypoints and routes,
but it will not clear permanent waypoints and routes.
Datalog Screen
The Datalog screen displays information on your current status in large digits so that it may be
viewed better from a distance. This information includes the elapsed distance and time, and
average speed from the time you turn the NS 10 on, or it may be reset at anytime. Additional
information displayed in large digits includes: Latitude, longitude, course, speed and time.
Press SELECT to retrieve the MAIN MENU.
Use the up/down arrows to highlight SYSTEM OPTIONS.
Press ENTER when the setting is correct. The SYSTEM OPTIONS menu will be displayed.