Filter
Top Products
- 34 -
(2) The following values may be set in Pr. 52 (Pr. 54):
(3) Pr. 52 (Pr. 54) is factory-set as follows:
Since the terminals (switches) are factory-set to X1=OFF and
X2=OFF, the monitor screen on the parameter unit shows “input
current monitoring”.
Note:Basically, a four-digit value is entered in Pr. 52 (Pr. 54). “0”
set in the first of the four digits is not displayed. The factory
setting of “123” is recognized as “0123”.
<Factory setting of terminals (switches)>
(4) Shift operation for PU main monitoring
Three different monitors set in Pr. 52 “PU main display data” can
be called in sequence by pressing the [SHIFT] key.
Pr. 52 (Pr. 54) Setting Display
0 Input current monitoring
1 Bus voltage monitoring
2 Input voltage monitoring
3 Input power monitoring
Parameter; Pr.52 (Pr.54) = 0(Note) 1 2 3