Filter
Top Products
Upgrading Your System 4-35
8. Using the four screws supplied with the drive, reinstall the side rails just removed
from the blank panel tray (see Figure 4-21, A). The rails for each side of the device
are identical.
Note:
Do not use the screws used to secure the blank panel
tray.
B
B
A
A
C
Attaching side rails to
removable media drive
A Side rails
B Four drive mounting
screws
CDrive
Figure 4-21. Attaching Side Rails to a Device
9. Engage the device side rails into the bay guide rails (see Figure 4-22). Ensure that
the device side rails (see Figure 4-23, A) are inside the bay guide rails exactly as
shown in Figure 4-23, B.
10. Push the drive into the bay until the screw holes of the side rails are directly in front
of the chassis screw holes and secure with the screws previously removed.
Figure 4-22 Installing Device