Filter
Top Products
3-16 Configuring Your System
Table 3-6. SCSISelect Setup Configurations
Option
Recommended Setting or
Display Only Your Configuration
SCSI Bus Interface Definitions
Host Adapter SCSI ID 7
SCSI Parity Checking Enabled
Host Adapter SCSI Termination Enabled
Additional Options
Boot Device Options Press Enter for menu
Boot Channel A First
Boot SCSI ID 0
7
Boot LUN Number 0
SCSI Device Configuration Press Enter for menu
Initiate Sync Negotiation Yes
Maximum Sync Transfer Rate 40.0
4
Enable Disconnection Yes
Initiate Wide Negotiation Yes
5
Send Start Unit Command Yes
1 and 5
BIOS Multiple LUN Support no
1
Include in BIOS Scan Yes
1
Advanced Configuration Options Press Enter for menu.
Reset SCSI Bus at IC Initialization Enabled
Extended BIOS Translation for DOS Drives
>1 GByte
Enabled
Host Adapter BIOS (Configuration Utility
Reserves BIOS Space)
Enabled.
1
Support Removable Disks
Under BIOS as Fixed Disks
1, 2
Boot Only
1
Display <Ctrl-A> Messages During BIOS
Initialization
Enabled
1
BIOS Support for Bootable CD-ROM Disabled
1
6
BIOS Support for INT 13 Extensions Enabled
1
1
No effect if BIOS is disabled.
2
Do not remove media from a removable media drive if it is under BIOS control.
3
Set to Disable if NetWare 3.12 or 4.11 Network Operating System is installed.
4
Set to 40.0 for channel A or 10.0 for channel B.
5
Set to Yes for channel A or No for channel B.
6
Set to Enabled for channel B or Disabled for channel A.
7
Set to 0 for channel A or 5 for channel B.