Filter
Top Products
System Overview 1-9
Chassis Features and Controls
Figure 1-2 shows the server front chassis features and controls. Figure 1-3
shows the server rear chassis features and controls.
A
H
I
D
E
F
G
CB
K
J
A
SCSI hard drive cages Used to mount the hard disks. Each cage contains four disks with
their three status LEDs mounted above.
B
Ejector button, 3 1/2-inch
diskette drive
Press to eject diskette.
C
Activity light, 3 1/2-inch
diskette drive
When lit, drive is in use.
D
LCD panel Displays information about BIOS and system failures (error and
diagnostic information).
E
Power LED When green, power is present in system. When off, power is
turned off or power source is disrupted. See Table 1-2 for a list
and description of the system LED indicators.
F
Status LED When green the system is OK. See Table 1-2 for a list and
description of the system LED indicators.
G
Disk LED When green, internal disk drives are being accessed. See Table
1-2 for a list and description of the system LED indicators.
H
DC power switch Press to turn system DC power on or off.
I
Reset switch Press to cause a hard reset to the system; the power-on self test
(POST) will run.
J
Load/eject button, CD-ROM
drive
Press to load CD and eject CD.
K
Activity light, CD-ROM drive When lit, drive is in use.
Figure 1-2. Front Chassis Features and Controls (front doors opened)