Filter
Top Products
Page 108 CPV550
5. Press the [ENT] key to review details for the selected category.
6. Move the ShuttlePoint knob to the up or down to select the station you want to review
and call back, then press the [RESEND] soft key to call the selected station.
Figure 19.5.1 - DSC CALL LOG list
19.5.2 To Delete the Received Log from the “DSC Log” Directory
1. Select the chart page and press the [CALL] key. The “DSC Operation” menu Tabs will
appear at the bottom edge of the display.
2. Press the [NEXT] soft key to change the menu Tabs to another Tabs.
3. Press the [DSC LOG] soft key to appear “DSC LOG” popup window on the display.
4. Move the ShuttlePoint knob to the up or down or turn the Channel knob to select the
category (DISTRESS or DSC CALL) to be deleted.
5. Press the [ENT] key, to review details for the selected category.
6. Move the ShuttlePoint knob to the up or down to select the station you want to delete,
then press the [DELETE] soft key to delete from the DSC Log.
7. Press the [CLR] key until the menu disappears or an easier method is to move the
ShuttlePoint knob to the left a few times.