Filter
Top Products
Page 3CPV550
Congratulations on you purchase of the GPS Chart Plotter!
Whether this is your first GPS Chart Plotter, or if you have other STANDARD
HORIZON equipment, the STANDARD HORIZON organization is committed
to ensuring your enjoyment of this GPS Chart Plotter. STANDARD HORIZON
technical support personnel stand behind every product we sell, and our
Product Support team invites you to contact us should you require technical
advice or assistance, at 800/767-2450.
CLEANING PROCEDURE FOR THE GPS CHART PLOTTER SCREEN
Cleaning of the Chart Plotter screen is a very important operation and must be done
carefully. Since the surface is covered by a antireflective coating, the procedure for
cleaning all the surfaces can be performed using the following procedure: You need
a tissue or lens tissue and a cleaning spray containing Isopropanol (a normal spray
cleaner sold for the PC screen, for example PolaClear by Polaroid). Fold the tissue
or lens tissue into a triangular shape, moisten the tip and use the index finger behind
a corner to move the tissue across the surface, in overlapping side to side strokes.
If the tissue is too wet, a noticeable wet film will be left in its path and you will need
to repeat the process. If too dry, the tissue won’t glide easily, and may damage the
surface.
CAUTION
- The GPS Chart Plotter is designed for maritime use. Please give attention to avoid
water intrusion into the C-MAP NT
+
/MAX C-CARD cartridge holder.
- Extensive exposure to heat may result in damage to the GPS Chart Plotter.
- The GPS Chart Plotter contains dangerous high voltage circuits which only
experienced technicians can handle.
- STANDARD HORIZON will not be liable for errors contained herein, or for
incidental or consequential damages in connection with the performance or use
of this material.