Filter
Top Products
Page 51CPV550
8.2 MARKS/WAYPOINTS LIST
The Marks/Waypoints List shows all the Marks and Waypoints that have been stored into
the GPS Chart Plotter. This page also allows you to:
ICON Allows sorting by icon type
FIND Searches through the Marks or Waypoints to find a point by name using the ShuttlePoint knob
LOCATE Shows the position of a Mark or Waypoint on the Chart page
EDIT Allows you to edit a previous stored Mark or Waypoint
SORT Sort the name of the Mark or Waypoint in ascending or descending order
NEW MARK Allows entering in Marks, editing icon type and position
MODE This selection controls how the Marks or Waypoints are shown on the Chart page. Selections are:
a. SHOW - icon and name are shown
b. ICON - only icon (no name) is shown
c. HIDE - Mark or Waypoint is hidden
d. SHOW ALL - All Marks or Waypoints are shown
e. ICON ALL - All Icons are shown without name
f. HIDE ALL - All Marks or Waypoints are hidden
DELETE Delete the selected point
DEL ALL Delete all stored points
SEND Sends the stored points to a external device (PC) capable of listening to NMEA WPL sentence.
RECEIVE Receive the points from an external device (PC) that is capable of sending NMEA WPL
sentence.
NOTE
The SEND and RECEIVE functions are usually used by navigation programs running on a
Personal Computer example Nobeltech.
Figure 8.2 - Marks/Waypoints List
8.3 CREATING A NEW MARK WITH THE MARKS/WAYPOINTS LIST
NOTE
This function is very useful if you have a list of Marks that you want to enter into the GPS Chart
Plotter.
1. Press [MENU]. Move the ShuttlePoint knob to highlight USER POINTS and press
[ENT] or move the ShuttlePoint knob to the right.
2. Move the ShuttlePoint knob to highlight
Marks/Wpts and press [ENT] or move the
ShuttlePoint knob to the right.
3. The Marks/Wpts List page will be shown (see previous picture).
4. To create a new Mark, move the ShuttlePoint knob to the right to highlight
NEW MARK
and press [ENT].
5. To edit a field move the ShuttlePoint knob to the right to highlight
EDIT and press [ENT].
6. Move the ShuttlePoint knob to highlight the field among symbol, name, Lat/Lon or Mode