Filter
Top Products
Page 117CPV550
20. RADIO SETUP
20.0 CHANNEL NAME CHANGE
This selection allows you to customize the name of a channel from the default name.
1. Select the chart page and press the [MENU] key two times. Move the ShuttlePoint knob
to highlight
RADIO SETUP and press the [ENT] key or move the ShuttlePoint knob to
the right.
2. Move the ShuttlePoint knob to highlight
VHF SETTING and press the [ENT] key or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight
COMMON CHANNEL SETUP and press the
[ENT] key or move the ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob to select the channel group (
USA, INTL, or CAN) you wish
to change the channel name and press the [ENT] key or move the ShuttlePoint knob
to the right.
5. Move the ShuttlePoint knob to highlight
CH NO. and press the [ENT] key or move the
ShuttlePoint knob to the right.
6. Move the ShuttlePoint knob to select the operating channel you wish change the
channel name and press the [ENT] key.
7. Move the ShuttlePoint knob to highlight
NAME and press the [ENT] key or move the
ShuttlePoint knob to the right.
8. Move the ShuttlePoint knob to up or down to scroll through the first character (letter,
number, or symbol) of the channel name. You may enter the name from the keypad. For
example: press the [1] key repeatedly to toggle among the four available characters
associated with that key: AÆBÆCÆ1.
9. Move the ShuttlePoint knob to the right to enter the first character and step to the next
character to the right.
10. Repeat step 8 and 9 until the name is complete. The name can consist of up to twelve
characters.
11. Press the [CLR] key until the menu disappears or an easier method is to move the
ShuttlePoint knob to the left a few times.
Figure 20.0 - CH EDIT menu