Filter
Top Products
System Manager/Zone Coordinator User’s Manual26
428516-YUM-B-0908
Setting Date and Time Parameters
To set date and time parameters:
1. From the Home screen, press the Setup icon. The System Manager Setup or
Coordinator Setup and Status screen appears.
2. For a System Manager, press the System Manager button. The System
Manager Setup screen appears.
For a Coordinator, press the Coordinator button. The Coordinator Setup screen
appears.
3. Press the Time Management button. The Time Management screen appears.
4. Press the button for the time parameter you want to change. The button label
describes the current setting. When you press the button, the appropriate screen
appears allowing you to change the value. Table 9 lists these parameters and
their ranges or possible selections.
Table 9: Time Management Parameters
Parameter Parameter Range/Selections
Current Date Month: January to December
Date: 1 to 31
Year: 2001 to 2099
Current Time 12:00 AM to 12:00 PM
Daylight Savings Time Enabled or Disabled
Time Display 12-hour format or 24-hour format
Time Zone Eastern, Central, Mountain, Pacific
Figure 12: Time Management Screen
Time Management
Daylight Savings Time:
Current Date:
Time Display:
12:47 PM
FIG:TmeMgtScrn
Time Zone:
Current Time:
Central
May 6, 2008
Enabled
12-Hour
Format
Select value to modify.