Filter
Top Products
System Manager/Zone Coordinator User’s Manual 53
428516-YUM-B-0908
5. Make the text message destination changes and press OK. The Text Message
Setup screen returns, reflecting the changes you made.
Setting Alarm Indicators
To set alarm indicators:
1. From the Home screen of the System Manager or Zone Coordinator, press the
Alarm Summary icon. The Alarm Summary screen appears.
2. Press the Alarm Setup button. The Alarm Setup screen appears.
3. Press the Alarm Indicators button. The Alarm Indicators Setup screen appears.
Alarm Priority Required to Send Text
Message
Select one of these options:
• Service, Service Priority and Critical
• Service Priority and Critical
• Critical
• None
SMTP Port 0-65535
Authentication Needed Yes or No
SMTP User Name
3
Enter SMTP User Name up to 24 characters
SMTP Password
3
Enter SMTP Password up to 20 characters. After
you enter the password, its characters appear as
asterisks (*) on the setup screen.
1. A full keyboard screen appears, allowing you to enter an e-mail address. Press OK to save the
e-mail address; remember to include the @ symbol. The E-mail Setup screen returns, indicating
the address you entered.
2. A full keyboard or keypad appears, allowing you to enter the host name or IP address. Press
OK to save the name/address. The e-mail Setup screen returns, indicating the name/address
you entered.
3. This parameter appears only if Authentication Needed = Yes.
Table 14: Text Message Setup Parameters (Part 2 of 2)
Parameter Parameter Range/Selections