Filter
Top Products
System Manager/Zone Coordinator User’s Manual 95
428516-YUM-B-0908
After the restore has completed successfully, the device restarts and the Home
screen appears in a few moments. If the restore failed, a message appears to
describe what you can do.
Relearning Connected Devices
To relearn connected devices:
1. From the Home screen, press the Setup icon. The Setup screen appears.
2. If you are at the System Manager, press the System Manager button. The
System Manager Setup screen appears. If this is a Zone Coordinator, press the
Coordinator button. The Zone Coordinator Setup screen appears.
3. Press the Restore Setup Information button. The Restore Setup Information
screen appears.
4. Press the Relearn button. The Relearn Connected Devices screen appears.
5. Press Continue. The message Relearn has been completed appears after the
process is finished. The process takes no longer than 1 minute to complete.
6. Click OK to return to the previous menu.
IMPORTANT: Relearning connected devices removes any configuration
information from the removed devices on the System Manager/Zone
Coordinator.
YK-SMU-0 - Relearn Connected Devices
FIG:RelrnScrn
Select Continue if you wish the [System manager name] to remove any
offline RTUs and Coordinators from its list of known devices.
Warning: Any configuration information from the removed
devices will be also lost.
Continue
Figure 75: Relearn Connected Devices Screen (System Manager)