Filter
Top Products
System Manager/Zone Coordinator User’s Manual76
428516-YUM-B-0908
Balancing a Zoning System
To balance a zoning system:
1. On the System Manager or Coordinator, go to the Zoning System Setup screen
(Figure 51). For steps, see Setting Up a Zoning System.
2. Press the Balance System button. The Balance Mode screen appears.
3. To initiate the balance mode, press the OK button.
The Zoning System Setup screen returns.
Figure 54: Balance Mode Screen
Click OK to select new value.
CancelOK
Balance Mode
FIG:BalMde
Curent Value:
Off
New Value:
On