Filter
Top Products
System Manager/Zone Coordinator User’s Manual78
428516-YUM-B-0908
Setting up Auxiliary Points
To set up auxiliary points:
1. From the Home screen of the System Manager, press the Setup icon. The
System Manager Setup screen appears.
2. Press the Auxiliary Points button. The Auxiliary Points Setup and Status screen
appears.
3. Press the Setup button. The Auxiliary Points Setup screen appears.
4. Select one of the IOM Controllers. The IOM Auxiliary Points Selection screen
appears.
5. Press the button of the auxiliary point you want to configure. When you press
the button, the appropriate screen appears allowing you to enable the point,
then define a value or state. Table 15 lists these selections and their ranges or
possible selections.
Table 20: IOM Points Setup Selections (Part 1 of 2)
Parameter Parameter Range/Selections
Instant Shutdown
1
<Cannot be changed by user>
Alarm Horn
2
<Cannot be changed by user>
AI1 Temperature, Humidity, or CO
2
Email Setup
Instant Shutdown
Auxiliary Points
Status
Edit IOM Name
IOM-1 Auxiliary Points Selection
Select point to set up.
Alarm Horn
2OB2IB
3OB1IA
4OB2IA
Figure 56: IOM Auxiliary Points Selection Screen