Filter
Top Products
System Manager/Zone Coordinator User’s Manual94
428516-YUM-B-0908
Restoring Factory Settings
To restore factory settings:
1. From the Home screen, press the Setup icon. The Setup screen appears.
2. If you are at the System Manager, press the System Manager button. The
System Manager Setup screen appears. If this is a Zone Coordinator, press the
Coordinator button. The Zone Coordinator Setup screen appears.
3. Press the Restore Setup Information button. The Restore Setup Information
screen appears.
4. Press the Backup Restore Setup Information button. The Backup/Restore
screen appears.
5. Press the Factory Settings button. The Restore Factory Defaults screen
appears.
6. Press Continue. The message Restore of factory defaults is in progress.
Please wait for the device to reset appears. The process takes no longer than
1 minute to complete.
IMPORTANT: Restoring the factory defaults replaces the configuration
parameters currently stored in the System Manager/Zone Coordinator with the
original factory defaults.
YK-SMU-0 - Restore Factory Defaults
FIG:FctryDefltsScrn
Select Continue to restore [name] to the factory default configuration.
Warning: Restoring the factory defaults will replace the current
configuration parameters with the factory defaults.
[name] will automatically reset after the default configuration is
restored
Continue
Figure 74: Restore Factory Defaults Screen (System Manager)