Filter
Top Products
System Manager/Zone Coordinator User’s Manual 61
428516-YUM-B-0908
Setting Up a Changeover Bypass Zone
To set up a changeover bypass zone:
1. From the Home screen, press the Setup icon. The System Manager Setup or
Coordinator Setup and Status screen appears.
2. For a System Manager, press the Systems button, then select the coordinator
that contains the zone you want to configure. The Coordinator Setup and Status
screen appears.
For a Coordinator, press the Systems button. The System Setup and Status
screen appears.
3. Press the Zones button. The Zones Setup and Status screen appears.
4. Press the Setup button. The Summary of Zone Controllers appears.
5. Select the zone. The Zone Setup screen appears.
Figure 42: Zone Setup Screen
ZC6 - Zone Setup
Voting:
Thermostat Warm / Cool
Adjust:
Temporary Occupancy
Input:
FIG:ZneStup
Enabled
Select value to modify.
Edit Zone Name
Heating Unocc Setpoint:
Heating Occ Setpoint:
Cooling Occ Setpoint:
Cooling Unocc Setpoint:
62.0 Deg F
Zone Status
Copy Zone Setup to
All Other Zones
Enabled
Enabled
68.0 Deg F
72.0 Deg F
78.0 Deg F
Max Damper
Position:
Heating Min Damper
Position:
Cooling Min Damper
Position:
20.0%
20.0%
95.0%