Filter
Top Products
System Manager/Zone Coordinator User’s Manual 71
428516-YUM-B-0908
Zoning System Setup Procedures
Zoning system setup procedures include:
• Setting up a zoning system
• Viewing zoning system status
• Requesting instant shutdown of a zoning system
• Balancing a zoning system
Figure 50 is a flowchart of the menu structure that is used to set up zoning systems on
the System Manager. These menu selections are described in the sections that follow.
Figure 50: Zoning System Setup Options - Menu Structure
Coordinator Setup
and Status
Zone
Coordinator
FIG:ZneSysStupFlw
Setup
Systems
Instant
Shutdown
System
Status
Zoning System
Status
Setup
• Control Mode
• Discharge Cooling Setpoint
• Discharge Heating Setpoint
• Min Number of Requests to
Change Mode
• Min Number of Urgent Requests
to Change Mode
• Min Time Before Changeover
• Number of Cooling Stages
• Number of Heating Stages
• Static Pressure Setpoint
Balance System
• Control Mode
• Discharge Air Temp Setpoint
• Discharge Air Temp Strategy
• Duct Static Setpoint
• Duct Static Setpoint Reset
• Duct Static Shutdown Limit
• Max DAT Setpoint Adjust
• Max Duct Static Setpoint Adjust
• Morning Warm-up
• Morning Warm-up Return Air Setpoint
• Representative Zone
• Unoccupied Heating/Cooling
CV/COB RTU
VAV RTU
CV RTU