Filter
Top Products
System Manager/Zone Coordinator User’s Manual 51
428516-YUM-B-0908
4. Press the button for the e-mail parameter you want to change. The button label
describes the current setting. When you press the button, the appropriate screen
appears, allowing you to change the value. Table 13 lists these parameters and
their ranges or possible selections.
5. Make the e-mail destination changes and press OK. The E-mail Setup screen
returns, reflecting the changes you made.
Configuring Text Message as Alarm Destination
To configure a text message as an alarm destination:
1. From the Home screen of the System Manager or Zone Coordinator, press the
Alarm Summary icon. The Alarm Summary screen appears.
2. Press the Alarm Setup button. The Alarm Setup screen appears.
Table 13: E-mail Destination Setup Parameters
Parameter Parameter Range/Selections
E-mail Address
Enter a valid e-mail address up to 30 characters
1
1. A full keyboard screen appears, allowing you to enter an e-mail address. Press OK to save the
e-mail address; remember to include the @ symbol. The e-mail Setup screen returns, indicating
the address you entered.
SMTP Server Host Specify SMTP server as a host name (up to 30
characters) or enter an IP address
2
2. A full keyboard or keypad appears, allowing you to enter the host name or IP address. Press
OK to save the name/address. The e-mail Setup screen returns, indicating the name/address
you entered.
Alarm Priority Required to Send E-mail
Message
Select one of these options:
• Service, Service Priority and Critical
• Service Priority and Critical
• Critical
• None
SMTP Port 0-65535
Authentication Needed Yes or No
SMTP User Name
3
3. This parameter appears only if Authentication Needed = Yes.
Enter SMTP User Name up to 24 characters
SMTP Password
3
Enter SMTP Password up to 20 characters. After
you enter the password, its characters appear as
asterisks (*) on the setup screen.