Filter
Top Products
System Manager/Zone Coordinator User’s Manual52
428516-YUM-B-0908
3. Press the Text Message Destination button. The Text Message Setup screen
appears.
4. Press the button for the text message parameter you want to change. The button
label describes the current setting. When you press the button, the appropriate
screen appears, allowing you to change the value. Table 14 lists these
parameters and their ranges or possible selections.
Table 14: Text Message Setup Parameters (Part 1 of 2)
Parameter Parameter Range/Selections
Phone Number Enter text message phone number up to 24
characters
1
Carrier Alltel, AT&T, Nextel, Cingular, Sprint, T-Mobile,
Verizon, or Virgin Mobile
Other Carrier’s Domain
Enter domain up to 30 characters
1
SMTP Server Host Specify SMTP server as a host name (up to 30
characters) or enter an IP address
2
Figure 34: Text Message Setup Screen
Email Setup
FIG:TxtMsgScrn
SMTP User Name:
SMTP Password:
SMTP Port:
Authentication
Needed::
Text Message Setup
Phone Number:
Carrier:
SMTP Server Host:
Alarm Priority Required to
Send Text Message:
Other Carrier’s
Domain:
Other
0.0.0.0
None
25
No