Filter
Top Products
System Manager/Zone Coordinator User’s Manual 33
428516-YUM-B-0908
Selecting Display Units
To select Display units:
1. From the Home screen, press the Setup icon. The System Manager Setup or
Coordinator Setup and Status screen appears.
2. For a System Manager, press the System Manager button. The System
Manager Setup screen appears.
For a Coordinator, press the Coordinator button. The Coordinator Setup screen
appears.
3. Press the Display Setup button. The Display Setup screen appears.
4. Press the Display Units button. The Display Units screen appears.
5. Press OK to change the units to the opposite of the current setting. The Display
Setup screen returns, reflecting the change you made.
Calibrating the Display
To calibrate the Display:
Note: Calibrate the screen when the display is not properly centered (for
example, skewed to the left or right).
1. From the Home screen, press the Setup icon. The System Manager Setup or
Coordinator Setup and Status screen appears.
Calibrate Touch
Screen
YK-SMU-0 - Display Setup
FIG:DispScrn
Display Units:
Language:
Imperial
English
Select value to modify.
Figure 18: Display Units Setup Screen