Filter
Top Products
System Manager/Zone Coordinator User’s Manual28
428516-YUM-B-0908
5. Use the number keypad to specify a new password. Use any combination of 4
digits. Press the Clear button if you need to erase the digits and start over.
As you enter the password, asterisks appear in the New Password field.
6. To confirm, reenter the new password in the Confirm Password field.
7. Press OK to submit the new password. The Security/Password Setup screen
returns.
Enabling (or Disabling) Password Security
To enable (or disable) password security:
Note: This function is only available at the System Manager (or Coordinator).
You cannot perform this procedure from the remote user interface.
1. From the Home screen, press the Setup icon. The System Manager Setup or
Coordinator Setup and Status screen appears.
2. For a System Manager, press the System Manager button. The System
Manager Setup screen appears.
For a Coordinator, press the Coordinator button. The Coordinator Setup screen
appears.
3. Press the Security (password) button. The Security/Password Setup screen
appears.
4. Press the Security (Password) button. The Security (Password) screen appears.
Figure 14: Security (Password) Screen
CancelOK
Security (Password)
FIG:PwdEna
Curent Value:
Enabled
New Value:
Disabled